sync4
125/361

*2*30 hop*1・Temporary or complete interruption of communicationAvoid using near electrical, AV/OA or magnetic devices that generates electromagnetic waves.Depending on the surrounding magnetic or electrical noise, communication noise may increase and the wireless communication of the Smart LEDZ system may be blocked. (Especially when using a microwave oven)The proximity of TVs, radios, etc. and the use of mobile routers may cause interference with the Smart LEDZ system.・Use within an ambient temperature range of 5 to 35°C.・Make sure that the humidity in the box is 80% or less and that there is no condensation.・Do not install the product in an environment that requires oil or chemical resistance.・The communication distance of the wireless control system is limited.Make sure that there are no obstacles between wireless or le10m or lessGLARE-LESSGENERAL DOWNLGHTSPOTLGHTLNEAR32 I I II I III i ilIi liI10mssDESGNBASELGHTPENDANTBaseLghtStripLghtMu-ModueSpotli LNEARLGHTLNEAR17/32ghtFoodghtHghPower Spotlight liOUTDOORSPOTLGHTLnear SpotlightUnder eaves for DOWNLGHT1 hopwithin theline-of-sight 25m2 hop3 hopRepeater*Up to 3 hops can be communicatedGatewayAdd GatewayIf there are hanging structures (wall, beams, etc.)GatewayAdd GatewayOutdoor waterproof box (resin)+Gateway (Fit)Communicationunavailable*Communication is not possible by diffraction.Outdoor waterproof box (resin)+Gateway (Fit)CommunicationavailableOutdoor lighting fixture+Wireless dimming lampline-of-sight 10mGateway(For Fit)AC100-242V(24-hour power supply)Router product)100m or lessGateway(For Fit Plus)AC100V(24-hourpower supply)within theline-of-sight 25mWi-Fi routerGateway panel/switchGatewayAdd GatewayIf there are pillars, walls, etc.GatewayAdd GatewayWhen there are varying ceiling heightsOutdoor lighting fixture+Wireless dimming lampOutdoor lighting fixture+Wireless dimming lampWhen communicatingdirectly with lighting fixtures100-242V (24-hour power supply)within theline-of-sight 10mWhen communicatingwith a gatewaywithin the(commercially (Base only)Tablet controller(For Fit/Fit Plus)Commercial smartphoneTablet controller(For Fit/Fit Plus)within the line-of-sight 25mCommercial smartphone(Fit app)(24-hour power supply)(24-hour power supply)(Base app)(Commercial product)150mm10m or less10m or lessThe settings may not be set correctly, if the settings are changed during the scheduled operation (auto) or sensor operation.Be sure to stop operation (manually) before changing the settings1) Before using this product, make sure that premises wireless stations for identifying mobile units, specified low power wireless stations, and wireless base stations for identifying amateur wireless stations are not operated nearby.2) If this product causes interference to a specific wireless station or wireless base station, immediately stop transmitting radio waves and move to another location or stop using it.3) This product has received technical standards conformity certification, so disassembling or modifying this product may be punishable by law.4) This product automatically selects a channel with good signal quality according to the installed wireless communication environment.5) This product is an independent wireless communication system that uses 2.4GHz band, and it does not connect to or interfere with other wireless communication systems or wireless LAN environments that use the same 2.4GHz band. (Refer to the instruction manual for details.)MaterialMetalImpact of obstaclesVery bigSmart LEDZ system has a limited communication range because of the wireless control system.The standard communication distance for gateways and lighting fixtures with wireless modules is 25m radius (50m diameter).[This is the communication distance in an open space that is not separated by general walls.]In case of open space without obstruction, communication over the standard is also available. However, since it differs depending on the environment, please install according to the installation conditions shown in the right figure.Tablet controller should be installed within 25m of the Gateway or a lighting fixture with wireless module. (Depends on system)If there are multiple gateways connected to the router by a LAN cable, be sure to install any one of the gateways within the communication distance 25m.Wireless specificationsThis product operates in the same frequency band (2.4GHz) used by industrial, scientific, consumer and medical equipment. This frequency band includes industrial, scientific, and medical equipment such as microwave ovens, in-house wireless stations (wireless stations requiring a license), specified low-power wireless stations (wireless stations requiring no license), and amateur wireless stations (wireless stations requiring a license) used in production lines.Common causes of communication failure and prevention measuresSince it relies on radio wave communication, when surrounded by things like air conditioning ducts, shutters, concrete beams, and aluminum sheet insulation, they may affect the communication performance and stability.Install recessed lighting fixtures (including separate power supply units and wireless modules) at least 10 cm away from insulation materials, ducts, beams, etc. in the ceiling.Wireless communication (radio waves) is also blocked or reflected by surrounding obstacles (reinforced walls, columns, insulating materials, etc.). The impact of various obstacles is as follows.Radio interferenceRadio interference may cause the following:・Shortening the communication distance of Notes on using Smart LEDZ in outdoor environments・Smart LEDZ system devices (gateway, repeater) cannot be installed directly outdoors. When installing outdoors, in order to ensure communication and waterproofing, be sure to fix it to the base material in a commercially available resin waterproof box and use it after taking measures against lightning surges.*Select a light color system without a monitoring window and install the waterproof box in the following locations. Areas where direct sunlight can be avoided/areas where water is not immersed/areas where snow is not covered*Use resin or wood as the base material in the box.ConcreteBrickGypsum BoardBigMediumSmalllighting fixtures with *1) The communication range varies depending on the specifications of the smart phone and Wi-Fi router. In case of gateway switch, can connect to a wireless LAN directly via phone. (Line-of-sight communication distance within 25m)*2) Communication is not relayed when the product is turned off. Install a repeater in a place where it is necessary to keep relaying at all times.*3) Since the wireless communication of the easy remote controller limits the control range, It is designed not to pop.PlasticsGlassSmallSmallabout 150mm in the upward direction.・When upgrading the gateway/wireless module using a tablet, be sure to check the upgrade procedure before proceeding.・After the setting work, write down the password etc. in the setting memo of the user manual.Construction (grounding work)Even when the operating voltageis below 150V, grounding work is required for devices that can be connected to an earth ground.The lighting condition may be affected by noise, etc.Contact to the sales office for the details of Smart LEDZ fixtureInstallation conditionsIf communication is not possible due to obstacles such as pillars or walls, even if the gateway, lighting/human sensors, and lighting fixtures are within 25m, it can be improved by adding Smart LEDZ Fit Plus dedicated gateways or lighting fixtures with wireless modules within the line-of-sight.*When adding a Smart LEDZ Fit Plus dedicated gateway, use HUB for relaying and branching to wired LAN cable from the router.*A repeater (FX-501W/B) may be able to improve the communication failure. Refer to the Operation Manual of FX-501W/B for more information on installation.gateways and wireless modules*If necessary, apply moisture-proof process inside of the box.communication devices or lighting fixtures, and use the device within the range of 10m or less.*The communication distance (25m) is equivalent to indoor communication in fine weather, but the communication distance is shorter in bad weather such as rain or snow. Wireless communication can be stabilized by installing a repeater, but we recommend using within a communication distance of 10m or less.・Wireless communication cannot be performed by diffracting the outer wall of the building.*For wireless communication, install a separate repeater at a point where diffraction is required.・When wirelessly communicating between devices installed indoors and outdoor devices or lighting fixtures, check the system installation conditions and use in a situation where communication can be secured.125FitFit PlusBaseTablet installation and handling・When installing the wall-mounted power supply adapter, provide a space of 10m or less10m or less

元のページ  ../index.html#125

このブックを見る